Ive tried several times to image a 32gb USB drive with the Interceptor CM4 OMV image, but the OS never seems to boot and I am caught in the boot screen. Ive used balenaEtcher and Raspberry Pi Imager with the same results. However, when I take the same USB and image it with the Official Raspberry Pi OS (both regular and lite) it boots into the OS fine.
This is probably a newbie question, but is there a proper way to image a usb with this image file?
For building the OMV OS, ive really only been familiar with the RPi Lite OS and using wget to grab OMV.
Daniel,
I'm sorry to hear that you are having issues. Just a point of clarification, we provide an imager that is a combination of a live boot to our image and an OS (our image) installer. A few things to note that you may have read about in other areas of the forum:
Please share a screenshot or picture of your boot screen when it is failing, so we can see the details.
Sometimes the issue is with a MS Windows system installing the our imager to the USB flash drive. In that case, you could see our FAQ for instructions on how to use a Linux device (like a Raspberry Pi
What image version from us are you currently trying to use?
I don't think this is your problem since you are able to book the RPi Official Image. Just putting it here in case it can help someone else: It could be that the boot order doesn't include booting via USB dongle. If that's the case, you would need a way to update your CM4 module (via RPi I/O Board) to udpate the boot order.
Let's start there and see what you share back to us. We'll get this figured out.